Skip to content

Twin Wire Arc Spray System

twin-wire-arc-spray-imc-metallizing-flame-spray-thermal-zinc-metallisation-metal-spray-gun-industrial-metal-components

In the Arc Spray Process pair of electrically conductive wires are melted by means of an electric arc. The molten material is atomised by compressed air and propelled towards the substrate surface. The impacting molten particles on the substrate rapidly solidify to form a coating.
Electric arc spray coatings are normally denser and stronger than their equivalent combustion spray coatings. Low running costs, high spray rates and efficiency make it a good tool for spraying large areas and high production rates. Electric arc spray systems are offered that feed wire by either an air or electrical motor. Electric arc spraying has the advantage of not requiring the use of oxygen and/or a combustible gas.

Types of Twin Wire Arc Spray Systems

Twin Wire Arc Spray

IMC-95

To Operate This Gun The Whole System Consists Of:

  1. Twin Wire Arc Spray Gun.
  2. Control Panel.
  3. Power Source (400/600 amps) with Cables.
  4.  Hose Set.
  5. Gun Stand.

Twin Wire of Size 1.6 mm to 3.17 mm (2 mm most commonly used).

  1. Very easy to use, maintain and replace parts.
  2. Variable Spray Speed.
  3. High Spray output.
  4. Low Running Cost.
  5. Pull Wire Mechanism.
  6. Handheld/Machine Mounting.
Inquire Us
imc-metallizing-flame-spray-thermal-zinc-metallisation-metal-spray-gun-industrial-metal-components
twin-wire-arc-spray-imc-metallizing-flame-spray-thermal-zinc-metallisation-metal-spray-gun-industrial-metal-components

To Operate This Gun The Whole System Consists Of:

  1. Twin Wire Arc Spray Gun.
  2. Control Panel.
  3. Power Source (400/600 amps) with Cables.
  4. Hose Set.
  5. Gun Stand.

Twin Wire of Size 1.6 mm to 3.17 mm (2 mm most commonly used).

  1. Cool Head Technology.
  2. Very easy to use, maintain and replace parts.
  3. Variable Spray Speed.
  4. High Spray output.
  5. Low Running Cost.
  6. Pull Wire Mechanism.
  7. Better Durability.
  8. Handheld/Machine Mounting.
Inquire Us

Twin Wire Arc Spray

IMC-96

Twin Wire Arc Spray

IMC-98

To Operate This Gun The Whole System Consists Of:

  1. Twin Wire Arc Spray Gun.
  2. Control Panel.
  3. Power Source (1000/1500 amps) with Cables.
  4.  Hose Set.

Twin Wire of Size 3.17 mm to 4.8 mm (3.17 mm most commonly used).

  1. Very easy to use, maintain and replace parts.
  2. Variable Spray Speed.
  3. Very High Spray output.
  4. Pull Wire Mechanism.
  5. For operation on machine mounting.
Inquire Us
imc-metallizing-flame-spray-thermal-zinc-metallisation-metal-spray-gun-industrial-metal-components
Here for you

Address: 974/B, Meghwalon Ki Dhani, Phase II, Basni
Jodhpur - 342005 (Rajasthan)
Mob: +91-9314714145 / +91-8107877085
Email: imc1@rediffmail.com